Quantum Q9000VOIP Series Programming Manual Download

Page: 1 / 25

Q9VOIP SERIES MANUAL

file:///C|/PACH-CO.COM-2022-B/online_manual/q9000voip_manual.htm[4/27/2022 8:57:08 AM]

QUANTUM Q9000VOIP SERIES

PROGRAMMING MANUAL V04262022

TABLE OF CONTENTS

Table of Contents Limitation of Liability

Products Limited Warranty

Limited Warranty Limits and Exclusions

CHAPTER 1 GETTING STARTED

CHAPTER 2 INSTALLATION AND WIRING DIAGRAM

General Wiring Diagram

CHAPTER 3 KEYPAD CORRELATION TABLE

CHAPTER 4 PROGRAMMING

Log-in to Programming Mode
Function Code 00: Change Master Code
Function Code 01: Add New Tenant Directory
Function Code 02: Edit Existing Directory
Function Code 03: Delete Tenant Directory
Function Code 04: Clear All Tenant Directories
Function Code 05: Enable or disable Call
Function Code 06: Add New Access Code
Function Code 07: Delete Access Code
Function Code 08: Clear All Access Codes
Function Code 09: Access Code Digit
Function Code 10: Add Card
Function Code 11: Delete Card
Function Code 12: Clear All Cards
Function Code 13: Set Time
Function Code 14: Set Date
Function Code 15: Initializing Event Recording
Function Code 16: Auto Unlock Schedule (AUS)
Function Code 17: Time Zone (TMZ)
Function Code 18: Holiday Zone (HLD)

Function Code 23: Lock-out Count
Function Code 24: Alarm
Function Code 25: Keypad Beep
Function Code26: Door Beep
Function Code 27: Talk Time
Function Code 28: Unlock Relay 1 Time
Function Code 29: Unlock Relay 2 Time
Function Code 33: Temporary Code
Function Code 34: Special Code
Function Code 35: Temporary Card
Function Code 36: Special Card
Function Code 38: System Acknowledge
Function Code 39: Disable and Enable Remote Access
Function Code 40: DTMF Relay 1
Function Code 41: DTMF Relay 2
Function Code 42: Relay 2 Mode
Function Code 43: Do Not Disturb Zone
Function Code 44: Disable Time Zone Relay
Function Code 45: Relay 1 and 2 Unlock Timer
Function Code 46: Firmware Version
Function Code 48: PBX Enable
Function Code 49: Edit Existing Access Code, Temporary Code and
Special Code
Function 50: Erase Memory to Factory Default
Function Code 51: Welcome Screen

CHAPTER 5 OPERATIONS

Call from the System
Opening Door Remotely
Opening Door Using Access Code, Temporary Code and Special Code
Opening Door Using Card, Temporary Card, and Special Card
Extending Talk Time
Call the System from Remote Location

CHAPTER 6 QWCM

Summary of Contents for Q9000VOIP Series


























Search results

Summary of Contents for Q9000VOIP Series

Reviews:

Related manuals for Q9000VOIP Series

Brands by name

Popular brands

Quantum Q9000VOIP Series, Programming Manual

Search results

Summary of Contents for Q9000VOIP Series

Reviews:

Related manuals for Q9000VOIP Series

Brands by name

Popular brands