Quantum Q9000VOIP Series, Programming Manual

Page: 14 / 25

Q9VOIP SERIES MANUAL
file:///C|/PACH-CO.COM-2022-B/online_manual/q9000voip_manual.htm[4/27/2022 8:57:08 AM]
Function Code 22 - Do Not Disturb
If Do Not Disturb is enabled, then the calling feature is disabled.
1. Log-in to programming
2. Enter 21 then #
3. Entert 0= disable, 1= enable then press #
Function Code 23 Lock-out Count
The system will be disabled in about 60 seconds after pressing invalid access code or swiping invalid card as specified on the Lock-out Count.
1. Log-in to programming
2. Enter 23 then #
3. Enter 1-9 (default=3) then press #
Function Code 24 Alarm
The system has a warning alarm if invalid code or card has been enter according to the setting on function code 23.
1. Log-in to programming
2. Enter 24 then #
3. Enter
0 = disable, 1 =disable system for 60 seconds and local beep (default setting), 2 = disable system for 60 seconds with no beep
3 = call directory (0-9) then press #
Function Code 25 Keypad Beep
Turn the keypad press beep On or Off
1. Log-in to programming
2. Enter 25 then #
3. Enter 0= off, 1= On (default) then press #
Function Code 26 Door Beep