Q9VOIP SERIES MANUAL
file:///C|/PACH-CO.COM-2022-B/online_manual/q9000voip_manual.htm[4/27/2022 8:57:08 AM]
LCD Display OK --- Flash OK --- RTC OK --- DTMF OK --- INIT START --- INIT COMPLTE --- SCROLLING
CHAPTER 3
Keypad Correlation Table
The QR5 buttons are lighted. Below are the correlation table for each key.
= 1 _ . , ? : ; ! @ + - * / = # < > %
Figure 3.1
M N O m n o 6
A B C a b c 2
P Q R S p q r s 7
D E F d e f 3
T U V t u v 8
G H I g h i 4
W X Y Z w x y z 9
J K L j k l 5
SPACE
Cancel call, Erase incorrect letter or number, exit programming (*
)
CALL, ENTER, EXCEPT PROGRAM
CHAPTER 4
Programming
Log-in to Programming Mode
1. Press 0 and # simultaneously, then release, the welcome screen will stop scrolling.
2. Enter 4-digit master code (default=0000) then press # (if you do not know the master code, see
Function Code 00 - Change Master Code
1.
2.
Enter 00 then #
3. Enter new master code then press #
Function code 01 - Add New Tenant Directory
A tenant directory consists of directory code (2, 3 or 4 digits depending on the setup, see fucntion code 19), tenant's name and phone number.
1.
2.
Enter 01 then #
