Q9VOIP SERIES MANUAL
file:///C|/PACH-CO.COM-2022-B/online_manual/q9000voip_manual.htm[4/27/2022 8:57:08 AM]
2. Enter 45 then #
3. Enter relay 1 (door 1) then press #
then press #
or relay 2 (door 2) then press #,
then press #
Function Code 46 Firmware Version
To check the system's firmware version
1.
2. Enter 46 then #
Function Code 48 PBX Enable
If the system is installed behind a Private Branch Exchange (PBX) then 9 is necessary before dialing an outside line. If this function is enabled then the system can
only be dialing an outside line, it cannot dial the extension.
1.
2. Enter 48 then #
3. Enter 0= disable or 1= enable then press #
4. Enter the number to access dial tone to dial an outside line, generally 9 is the default number for most PBX system, then press #
5. Select delay time for the PBX system to access dial tone, generally 2-3 second delay is plenty of time, then press #
Function Code 49 Edit Existing Access Code, Temporary Code and Special Code
1.
2. Enter 49 then #
