Mouse Connections is used to pair the Q-Logic 3
to a Bluetooth mouse, allowing the input from the
Q-Logic 3 to act as a mouse input in place of the
mouse. The mouse feature can be connected to
computers that use a Windows or Mac operating
system. Bluetooth dongles can also be connected,
but refer to the dongles instructions for compatible
operating systems.
Prog Access and Prog Access iOS can be enabled
by highlighting the desired function then pushing
the joystick to the right. Pushing the joystick to the
right again will disable the function.
NOTE: Program access may either be in the Settings screen or the Aux screen depending upon
configuration.
NOTE: When pairing the Q-Logic 3 system to your device, the Q-Logic 3 Bluetooth ID# is at the
top of the screen for easy pairing. Please refer to your device for pairing instructions.
Prog Access Econ-w allows the Q-Logic 3 to be programmed by a dealer of medical equipment
through a paired Windows device. Prog Access Econ-w must be enabled to allow the dealer of medical
equipment access to the Q-Logic 3 parameters for adjustment. If Prog Access Econ-w is not enabled
(even if the dealer of medical equipment has been paired with the Q-Logic 3 previously) the Q-Logic 3
cannot be programmed by the dealer of medical equipment.
Prog Access Econ-i allows the Q-Logic 3 to be programmed by a dealer of medical equipment through
a paired iOS device. Prog Access Econ-i must be enabled to allow the dealer of medical equipment
access to the Q-Logic 3 parameters for adjustment, if Prog. Access Econ-i is not enabled (even if the
dealer of medical equipment has been paired with the Q-Logic 3 previously) the Q-Logic 3 cannot be
programmed by the dealer of medical equipment.
NOTE: Once the dealer of medical equipment has completed programming or if the connection
is lost, the dealer of medical equipment must re-pair the device with the Q-Logic 3 to perform
any additional programming.