Quantum PX500 Series Firmware Upgrade Instructions for Stacked Libraries
Document 81-81802-01A01
April 2007
8
Uploading Library Firmware
3
Use the up and down arrows to select
Stack role
and press
Enter
.
The
Stack role
screen displays.
4
Use the up and down arrows to select the appropriate stack role (
Master/
Slave
) for this library and press
Enter
.
The system prompts you with one of the following confirmation screens
asking:
•
Change to Master and reboot this system?
•
Change to Slave and reboot this system?
5
Press
Yes
.
The library shuts down.
When all the libraries in the stack have been returned to their original stack
role, power on all of the libraries and return to normal operation.
Note:
If stack role is changed to
Master
, there will be an additional
Attention
screen that suggests the users to remove the old
master if the current stand alone cabinet is added to an
existing stack. Press
Ok
after confirmation.
Note:
If the stack role is changed to
Slave
, the Ethernet cable can be
disconnected from cabinet's system controller board.
