Quantum PX500 Series Firmware Upgrade Instructions for Stacked Libraries
Document 81-81802-01A01
April 2007
Introduction
3
Introduction
0
If PX500 Series (PX502, PX506, and PX510) libraries are in a multiple library
stack, the library firmware must be uploaded individually to each cabinet. If
you attempt to upload library firmware to only the Master library in the
stack, the slave libraries may not receive the firmware update properly.
Uploading Library Firmware
0
Uploading library firmware to a multiple library stack consists of the
following steps:
•
Changing the Library Stack Role
•
Uploading Library Firmware
•
Returning the Library Stack Role
Changing the Library
Stack Role
0
The library must be in
Stand alone
mode prior to receiving the library
firmware update.
To change the library stack role:
1
From the Operator Control Panel (OCP), press
Setup
from the
Home
screen.
The OCP displays the
Setup
screen (see
figure 1
):
Figure 1 Setup Screen
2
From the
Setup
screen, use the up and down arrows to select
Cabinet
and
press
Enter
.
The
Cabinet
screen displays (see
figure 2
):
Enter
