ATL PowerStor L200 Series Library Unpacking Instructions
Document 6322502-01, Ver. 1 Rel. 0
February 1999
6
Unpacking the Library
Unpacking the Library
2
Unpack the library as close to the installation location as possible.
The unpacking instructions vary depending upon whether you
received a desktop or rack-mount library. If you received a desktop
library, you should have only one shipping carton. Follow the
instructions in “Uncrating the Library” on page 7 to unpack the
library.
If you received the rack-mount library, you will have two shipping
cartons. The large carton contains the library, and the smaller carton
contains the rack-mount kit.
To unpack and install the rack-mount library, you must:
•
Uncrate the rack-mount kit and verify its contents (see “Uncrating
the Rack-Mount Kit”).
•
Install the rack-mount kit in the rack (see “Installing the
Rack-Mount Kit”).
•
Uncrate the library and place it in the rack (see “Uncrating the
Library”).
Before You Begin
2
Inspect the shipping pallet and carton for damage that may have
occurred during shipment. Report any damage to the shipper
immediately.
Uncrating the
Rack-Mount Kit
2
Cut the packing tape at the top of the shipping carton and unpack the
rack-mount kit. Before installing the rack-mount kit in the rack,
compare the contents of the carton with the packing list inside the
shipping carton.
Installing the
Rack-Mount Kit
2
Install the rack-mount kit in the rack, referring to the drawing
provided in the shipping carton.
