Quantum DX-Series: Optional X520 Network Card Installation Instructions
6-67765-01 Rev C
March 2014
Opening the Node Cover
5
Figure 4 Removing the DXi
Node from the Rack
5
Grasp the sides of the Node firmly and pull it forward until the rail standoffs
are at the front of the J-slots.
6
Lift the Node up and away from the rack and place it on a flat, stable
surface.
WARNING:
The DXi Node (including hard drives) weighs more than 50
pounds (22.7 kg). A minimum of two people are required to
lift the chassis.
7
Press and hold the power button on the front of the Node for three seconds
to fully drain the system of stored power prior to removing the cover (see
Figure 5
).
Inner slide rails
Rear rail standoffs
Rear rail J-slots
Slide-release lock button
Lock lever
