Quantum NDX Series, User Manual

Page: 37 / 40

Chapter 4: Chassis Setup and Maintenance
Power Supply
Quantum NDX NAS Tower User’s Guide 25
Figure 11 Removing the Power
Supply
Power supply
Changing the Power
Supply
1 Disconnect the chassis from any power source.
2 Remove the screws securing the power supply to the chassis, which
are located on the rear of the chassis.
3 Pull the power supply out of the chassis.
4 Change the failed power module with the same model.
5 Push the new power supply module into the power bay until you
hear a click.
6 Plug the AC power cord back into the module and power up the
server.