![background image](http://html2.mh-extra.com/html/quantum/lto3-a-series/lto3-a-series_user-manual_3492354076.webp)
Chapter 6 UNIX Settings
Configuring for Linux
62
LTO-3 Tape Drive User’s Guide
You may see output similar to:
(scsi0)<Adaptec AHA-294XX Ultra160 SCSI host
adapter> found at PCI 0/16/0
To find existing SCSI devices execute the command:
cat /proc/scsi/scsi
You may see output similar to:
Host: scsi0 Channel: 0 Id:6 Lun:00
Vendor: CERTANCE Model: ULTRIUM 3
Type: SequentialAccess ANSI SCSI Revision 04
Use the output of these two commands to see which SCSI target ID
numbers are free. In the above example a tape drive is attached at target
ID 6. SCSI ID #7 is almost always dedicated to the SCSI controller. Never
configure your target device for ID 7 unless you are absolutely sure that
the controller is not addressed for ID 7.
The widely available distributions of Linux automatically install the
proper SCSI and tape device drivers. If you executed the
cat
command
above, you have ensured that the SCSI driver for your controller is
installed. To view currently loaded modules, execute the
lsmod
command. Ensure that one of the entries is
st
.
To view the st device number for your attached tape drive, execute the
command:
dmesg | grep tape
You should see output similar to:
Detected SCSI tape st0 and scsi0 . . .
Using the LTO-3
Tape Drive
6
The LTO-3 Tape Drive can be configured via the
mt
command options
and a default configuration can be setup using the
stsetoptions
command
from within the mt command. Refer to the man page for
mt
for details.
We suggest not using the erase command nor commands which attempt
to partition the tape. Partitioning is not supported in the LTO format.
For commands that use density and tape size settings, the tape density is
124,000 bpi and the tape length is 1800 feet. For commands that use a
blocking factor, we suggest a factor of 128.
Summary of Contents for LTO3 A-Series
