Manual for KuDoz 7 series
Chapter 2
Installation Instructions
Chapter 2
Installation Instructions
This section covers External Connectors and Jumper Settings. Refer to the motherboard
layout chart for the locations of all jumpers, external connectors, slots and I/O ports.
Furthermore, this section lists all necessary connector pin assignments for your reference.
The particular states of the jumpers, connectors and ports are illustrated in the following
figures. Before setting the jumpers or inserting these connectors, please pay attention to
the directions.
Be sure to unplug the AC power supply before adding or removing expansion
cards or other system peripherals, otherwise your motherboard and expansion
cards might be seriously damaged.
External Connectors
PS/2 Keyboard Connector, PS/2 Mouse Connector
PS/2 keyboard connector is for the usage of PS/2 keyboard. If using a standard AT size
keyboard, an adapter should be used to fit this connector. PS/2 mouse connector is for the
usage of PS/2 mouse.
USB1, USB2 Connectors
Two USB ports are for connecting USB devices.
USB3, USB4 and USB5, USB6 Connectors
Four USB ports are not available on the back panel. Therefore, we provide a 10-pin cable(
optional ) to connect onboard USB headers and USB devices.
Chapter 2
PS/2 Mouse Connector
PS/2 Keyboard Connector
Optional
USB1
USB2
Optional
1
+5v
DT3-
DT3+
GND
GND
GND
GND
DT4+
DT4-
+5v
1
+5v
DT5-
DT5+
GND
GND
GND
GND
DT6+
DT6-
+5v
USB6, USB5
USB4, USB3