Quantum KuDoz 7 series, Manual

Page: 33 / 69

Manual for KuDoz 7 series
l AGP&P2P Press Enter Enters to set the following items.
Bridge Control
l AGP Aperture Size 4~256M Sets the effective size of the Graphics Aperture
to be used in the particular PAC Configuration.
l AGP Mode 1x,2x Supports AGP 1x, 2x or 4x mode. If the AGP
4x card does not support 4x mode, the item “4x” will
hide.
l AGP Driving Auto The default setting is recommended.
Control Manual
l AGP Driving 00-FF Sets this item when the AGP 4x card runs
Value incorrectly.
l AGP Fast Write Enabled Enables AGP Fast Write.
Disabled Disables AGP Fast Write.
l AGP Master 1 WS
Enabled
Enables AGP Master 1 WS Write.
Write Disabled Disables AGP Master 1 WS Write.
l AGP Master 1 WS
Enabled
Enables AGP Master 1 WS Read.
Read Disabled Disables AGP Master 1 WS Read.
l CPU&PCI Bus Press Enter Enters to set the items about CPU&PCI Bus.
Control
l PCI1 Master 0 WS
Enabled
Enables PCI1 Master 0 WS Write.
Write Disabled Disables PCI1 Master 0 WS Write.
l PCI2 Master 0 WS
Enabled
Enables PCI2 Master 0 WS Write.
Write Disabled Disables PCI2 Master 0 WS Write.
l
PCI1 Post Enabled Enables PCI1 Post Write.
Write Disabled Disables PCI1 Post Write.
l
PCI2 Post Enabled Enables PCI2 Post Write.
Write
Disabled
Disables PCI2 Post Write.
l PCI Delay Enabled Enables PCI Delay Transaction.
Transaction
Disabled
Disables PCI Delay Transaction.
l Delay Transaction Enabled Enables PCI Buffer Delay Transaction.
Disabled Disables PCI Buffer Delay Transaction.
Chapter 3