![background image](http://html1.mh-extra.com/html/quantum/internal-storage-system-travan-40-gb/internal-storage-system-travan-40-gb_user-manual_3820369010.webp)
Installing the Drive
Installation Procedure
6
Quantum Travan 40 GB Internal Storage System
Figure 2 Existing
Computer with Two IDE
Ports (ATAPI Devices on
Both Primary and
Secondary IDE Ports)
Continue to page 7 for instructions on setting the master/slave
jumpers.
If your computer has only one IDE port:
If your computer has only a single IDE port (see
figure 3
) it is
probably being used by the hard disc drive.
You should not attach
your tape drive to an IDE port that is being used by a hard disc or a
sound card
.
In this situation, before you can install the tape drive, you must
purchase an ATAPI host adapter that provides a second IDE port.
You will also need a second IDE cable for the tape drive. After
installing the host adapter, set the master/slave jumpers.
Computer
Motherboard
Primary
IDE port
Secondary
IDE port
CD-ROM
configured as "Master"
Attach tape drive here
configured as "Slave"
CD-ROM
CD-ROM
Hard
Disc
Hard
Disc