Installing the Internal GoVault Dock
3
GoVault™ for Windows
Before Installing GoVault
0
Installation of GoVault for Windows requires the following computer hardware,
software, and tools:
• Hardware
• CPU, either:
• Intel Pentium 4 or above
• AMD K6 or above
• CD-ROM drive
• 2 Mbytes of hard disk storage
• For the internal GoVault dock:
• One empty 3.5-inch or 5.25-inch drive bay
• One empty PCI card slot (if SATA host bus adapter is needed)
• SATA II compliant interface
• For the external GoVault Tabletop dock, one available USB port
• Software
• Windows 2000, Windows 2003, Windows XP, or Windows Vista
• Tools, for the internal GoVault dock:
• Phillips screwdriver
Installing the Internal GoVault Dock
To install the internal GoVault dock and cartridge disk drive, complete the following
procedures in the order presented:
1
Installing the SATA Card
, if required
2
Installing the Internal GoVault Dock
Installing the SATA Card
0
If your workstation or server system does not already have either a SATA-equipped
motherboard or a SATA-compliant host bus adapter PCI card, you should follow the
procedures provided by the manufacturer of the SATA card and your computer reference
manual.
Note:
The standard configuration of the internal GoVault dock includes side brackets
and a 5.25-inch bezel for installation in a 5.25-inch drive bay. If you need to
install the dock in a 3.5-inch drive bay, use the procedure in appendix A of the
GoVault for Windows User’s Guide
to remove the side brackets and change the
bezel before installing the GoVault dock.