If operated through the controller/single switch combination, the fender
lights will turn on when the power chair is turned on and the joystick is de-
fl ected in any direction. The power chair must remain powered on for the
lights to stay illuminated. When the power chair is turned off, the lights will
turn off.
NOTE: Turn off fender lights when the power chair is not in use to
optimize power chair performance per charge.
To operate the fender lights using only a single switch version:
1. Press the single switch once to activate the fender lights.
2. Press the single switch again to deactivate the fender lights.
NOTE: The single switch is mounted using the provided fabric fastener.
The location of the single switch should be convenient and functional
for the power chair user. Possible locations include on an armrest, the
side rail, the controller, or the headrest.
NOTE: Placing the single switch on the outside of the power chair, for
example, on the side rail, may increase the overall width of the power
chair.
WARNING! The single switch should be mounted in a location that is
convenient for the power chair user and where the switch harness will
not be caught in drive tires or running gear, pinched in the seat frame,
or damaged when passing through doorways.
Summary of Contents for edge 2.0
Page 1: ...Owner s Manual ...
Page 4: ... Identification Key 11 9 10 8 12 A B 1 3 13 2 4 5 7 6 ...
Page 45: ... ...
Page 46: ... ...
