Quantum DXi6902, Field Service Manual

Page: 152 / 242

Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing the Node Network Daughter Card
128 Quantum DXi6902 User’s Guide
Figure 77 Removing and
Installing the Integrated
Storage Controller Battery
Installing a Replacement Integrated Storage Controller
Battery
To install the replacement integrated storage controller battery in the
DXi6902 Node:
1
Plug the replacement battery cable into the integrated storage
controller and insert the battery into the controller (see Figure 77 ).
2
Replace the integrated storage controller (see Replacing the
Integrated Storage Controller ).
3
Close the Node cover (see Opening and Closing the Node ).
4
Run
Factory Detect Hardware
from the
Service Menu
to detect the
new hardware (see Factory Detect Hardware on page 40).
5
In the remote management console, delete any administrative alerts
and close any service tickets.
Replacing the Node Network Daughter Card
This section describes how to remove and replace the network daughter
card in the DXi6902 Node and contains the following sections:
• Obtaining a Replacement Network Daughter Card
Storage controller
battery