Initial Configuration
33
DXi6700
Figure 24 Map Hosts, Define
Groups Page
3
Enter information about the host access group:
•
Group Name
- Enter a name for the group.
•
Partition
- Select the default
DXi6700vtl
partition to associate with the group.
•
Host
- Select the host (initiator) to associate with the group.
Note:
Select the host you created in the procedure
•
Target
- Select the target (port) to associate with the group.
The
Target Ports
section displays a graphical representation of the Fibre
Channel and Ethernet ports as they appear on the rear of the system. A dark
border displays around the currently selected target.
4
(Optional) Select the
Use CCL
check box to use the Command and Control LUN.
Note:
The CCL (Command and Control LUN) is not used in most environments.
This option is recommended for host access groups that contain an HP-UX
host. It can also be used if hosts that are not assigned to any host access
group exist in the SAN. The CCL is accessible to hosts only through LUN 0.
Caution:
If you are not sure if you should use CCL, contact Quantum Customer
Support before you enable this option.
5
Accept the default settings for the media changer and tape drives in the host access
group.
The LUN assignment displays next to the device.
6
Click
Apply
.
