Quantum DXi4701 User Manual Download Page 204

Page: 204 / 440

Chapter 7: DXi4701 Status
Performance

178

Quantum DXi4701 User’s Guide

• Hold the cursor over a bar to display the value of the bar.

Fibre Channel

The

Fibre Channel

page allows you to view throughput performance

for Fibre Channel send and receive activity.

Note:

The Fibre Channel page displays only on DXi4701
configurations that include a Fibre Channel card.

To access the

Fibre Channel

page, on the

Performance

page, click the

Fibre Channel

tab (see Figure 74).

Figure 99 Fibre Channel Page

Use the

Fibre Channel

page to display recent fibre channel activity in

dynamic graphs:

• The top graph reports data received and the bottom graph reports

data sent.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands