Quantum DXi4701, User Manual

Page: 166 / 440

Chapter 6: DXi4701 Replication
Receive NAS
140 Quantum DXi4701 User’s Guide
Note: You cannot delete a snapshot if a failback operation is in
progress for the snapshot. Wait for the failback operation to
complete, or abort the operation (see Failback Jobs on
page 141).
To delete a snapshot:
1 Do one of the following actions:
• On the source system, disable replication for the share
associated with the snapshot (see Enabling Replication For a
Share or Partition on page 126).
• On the target system, delete the source system associated with
the snapshot from the list of allowed replication sources (see
Deleting a Replication Source on page 259).
2 On the target system, select a snapshot in the Snapshots List and
click Delete .
Note: If you delete the last snapshot for a share while replication
for the share (to this target) is still enabled, any replicated
data not yet protected by a replicated share is not deleted.
To delete this data, on the source system, disable
replication for the share before deleting the last snapshot.
3 Click Yes to confirm the action.
Recovery Jobs
The Recovery Jobs page allows you to view information about snapshot
recover operations that were previously completed.
To access the
Recovery Jobs page, on the Receive NAS page, click the
Recovery Jobs tab (see Figure 75 ).