Quantum DXi4701, User Manual

Page: 285 / 440

Chapter 9: DXi4701 Configuration
Replication Configuration
Quantum DXi4701 User’s Guide 259
Figure 143 Add Allowed
Source
2 In the Source Hostname or IP box, enter the hostname or IP
address of the system that will send the replicated data to the
DXi4701.
Note: To use hostname format, you must specify at least one DNS
IP address on the Network page (see Network on
page 303).
3 Click Apply .
Deleting a Replication
Source
Delete a system from the list of replication sources if it will no longer
send replicated data to the DXi4701. After the source system is deleted,
the DXi4701 will no longer accept replicated data from that system.
To delete a replication source:
1
Under
Source DXis
, select one or more sources to delete.
2
Click
Delete
.
Note: If a source DXi is deleted from the list, its contribution to the
cumulative totals on the Home page are not removed until you
clear Receive statistics (see Replication Performance on
page 163).
Changing the
Maximum Number of
Snapshots
During scheduled or manual data replication, the DXi4701 receives a
snapshot from the source system. A snapshot contains all of the data
necessary to fully recover or failback a NAS share or VTL partition to the
point in time when the snapshot was saved.