Quantum DXi4701 User Manual Download Page 167

Page: 167 / 440

Chapter 6: DXi4701 Replication

Receive NAS

Quantum DXi4701 User’s Guide

141

Figure 75 Recovery Jobs Page

The

Snapshot Recovery Jobs

section displays the following information

about recovery jobs:

•

Original Share Name

- The name of the share the snapshot was

created from.

•

New Share Name

- The name of the share the snapshot was

recovered to.

•

Source DXi

- The hostname of the system that the snapshot was

received from.

•

Started

- The time the recovery job was started.

•

Finished

- The time the recovery job finished.

•

Status

- The status of the recovery job (

Success

In Progress

, or

Failed

To delete information for a recovery job, select it in the

Snapshot

Recovery Jobs

list and click

Delete Job Info

Failback Jobs

The

Failback Jobs

page allows you to view information about snapshot

failback operations that were previously completed. You can also abort

a failback that is currently in progress.
To access the

Failback Jobs

page, on the

Receive NAS

page, click the

Failback Jobs

tab (see

Figure 76

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands