Quantum DXi4701 User Manual Download Page 152

Page: 152 / 440

Chapter 6: DXi4701 Replication
Replication Send

126

Quantum DXi4701 User’s Guide

•

Queued

- The synchronization job is queued and will continue when

the system is ready.

•

Success

- The synchronization job was completed successfully.

•

Recovering

- The recover operation is in process.

•

Replicating

- The replication operation is in process.

•

Failed

- The synchronization job was not completed.

Enabling Replication

For a Share or Partition

Enable replication for a NAS share or VTL partition to allow the data on

the share or partition to be replicated to other DXi systems (the targets).

Disable replication if you do not want to replicate the share or partition

to other DXi systems.

Note:

To be eligible for replication, a share or partition must have

data deduplication enabled at the time it is created.

To enable or disable replication for a share or partition:

Select the share or partition and click

Configure

The

Share or Partition Configure

window displays (see

Figure 68

Figure 68 Share or Partition
Configure Window

Select the

Enable Replication

check box to enable replication for

the share or partition.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands