Quantum DXi4701, User Manual

Page: 160 / 440

Chapter 6: DXi4701 Replication
Receive NAS
134 Quantum DXi4701 User’s Guide
Receive NAS
The Receive NAS page allows you to manage incoming replication
activity for NAS shares. You can recover a replicated share on the target
system if the source system is unavailable. Once the source system
becomes available, you can failback the share to make it available on
the source system again.
Note: Before you can receive replicated shares, you must specify one
or more replication sources (see Adding a Replication Source
on page 258).
To access the Receive NAS page, click the Replication menu, and then
click the Receive > NAS tab.
Use the Receive NAS page to perform the following tasks:
• View received snapshots and recover, failback, or delete snapshots
(see Received Snapshots on page 134).
• Manage recovery jobs (see Recovery Jobs on page 140).
• Manage failback jobs (see Failback Jobs on page 141).
• Manage shares configured for Directory/File Based Replication (see
Directory/File Based on page 142).
Received Snapshots
The Received Snapshots page allows you to view and work with
received snapshots. When a replicated NAS share is received from a
source system, it is saved as a snapshot. The snapshot contains all of the
data necessary to fully recover or failback the share to the point in time
when the snapshot was saved.
To access the
Received Snapshots page, on the Receive NAS page, click
the Received Snapshots tab (see Figure 72 ).