![background image](http://html1.mh-extra.com/html/quantum/dxi4500/dxi4500_manual_3756124258.webp)
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
258
CLI Error Codes
E8050081
CliListBonds: Failed to get /sys/class/net/bondX/bonding/
slaves file!
E8050082
CliListBonds: Failed to get /sys/class/net/bondX/bonding/
mode file!
E8050083
CliListBonds: Failed to get bond IP info!
E8050100
The netcfg script is not found!
E8050110
Netmask cannot be zero!
E8050111
Netmask is invalid, the rightmost bit must be zero!
E8050112
Netmask cannot contain non consecutive zero bits
E8050120
Network device name cannot be empty!
E8050121
Network device name is missing before comma!
E8050122
Network device name is missing after comma!
E8050123
Device name must start with an alphabetic label (valid format
is <label><devno>[:<vifno>])
E8050130
Device name: device number is missing (valid format is
<label><devno>[:<vifno>])
E8050131
Device name: device number is invalid
E8050132
Device name: device number is out of range
E8050133
Device name: device number has invalid trailing character!
E8050140
Device name: virtual interface number is missing (valid
format is <label><devno>[:<vifno>])
E8050141
Device name: virtual interface number is invalid
E8050142
Device name: virtual interface number is out of range!
E8050143
Device name: virtual interface number has invalid trailing
character!
E8050150
Command cannot run because custom configuration is
already in place!
E8050401
EnableJumbo: Option "enable" is missing.
E8050402
EnableJumbo: Option "enable" requires a value
E8050403
EnableJumbo: Option "enable" has invalid value
E8050404
EnableJumbo: Failed to read/get option "enable".
E8050405
EnableJumbo: Failed to write/set option "enable".
E8050411
EnableJumbo: Option "bond0" is required because another
optional option is specified!
Error Code
Error Message