![background image](http://html1.mh-extra.com/html/quantum/dxi4500/dxi4500_manual_3756124018.webp)
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
18
VTL Configuration CLI Commands
Consider the command
--list healthcheckstatus
, which is not supported in Web
Services. To understand how it can be run over Web Services, one needs to
understand how the
runcmd
CLI works.
The
runcmd
CLI is very simple. Any CLI command can run directly as is, such as
the following command:
syscli --list healthcheckstatus
However, the command can be run indirectly by specifying it as options to the
runcmd CLI as follows:
syscli --runcmd --list healthcheckstatus
The syntax above runs the
runcmd
CLI, which then parses the options specified
after the “—runcmd” token. Based on these options, the runcmd CLI invokes
the appropriate system API to execute. In the end the effect is executing the
--list healthcheckstatus
command.
Because the
runcmd
CLI is supported over Web Services, it can accept the –ws
option to send the command to a WS server for execution as follows:
syscli --runcmd --list healthcheckstatus --ws [<remotehost>[:<port>]]
Documentation of Web
Services Commands
Because Web Services commands and regular CLI commands differ only in the
additional options
--ws
and
--credtoken,
there is no need to document WS
commands separately. The option
--credtoken
is optional and can be ignored
because syscli can use the cached value.
VTL Configuration CLI Commands
The following sections describe the supported VTL CLI commands:
Note:
VTL configuration CLI commands are available only on the DXi6700
systems.
•
Listing Existing VTL and Its Attributes
•
Listing Available Library Models
•
Listing of Supported Tape Drive
•
•
•
•
•
•
Listing the Media and Attributes
•
•