![background image](http://html1.mh-extra.com/html/quantum/dxi3500/dxi3500_quick-start-manual_3751849020.webp)
20
Initial Configuration
DXi3500 and DXi5500 Quick Start Guide
To configure the DXi3500/DXi5500:
1
Turn on the DXi3500/DXi5500 system by pressing the power button located on the
).
Figure 16 Power Buttons
2
Connect an Ethernet cable to port ETH1 and to the local area network (LAN) (see
for DXi3500 and
for DXi5500).
Note:
Ensure that all Fibre Channel hosts/switches or Ethernet switches are powered
on before turning on the DXi3500/DXi5500 system.
Note:
Wait 10 minutes before continuing with the procedure.
Note:
The system BBU may take a number of hours to fully charge, during this
time the DXi3500/DXi5500 will run in a slower mode.
Power button
Power button