DX3000 and DX5000 Quick Start Guide
8
Figure 11 DX3000 System
Cabling
Cabling a DX5000 System
0
Connect the following cables to the back of the DX5000
system (see
figure 12
):
•
Connect a power cable to each power supply
•
Connect an Ethernet cable to port ETH1(left-hand port)
•
Fibre Channel cable (optional)
Figure 12 DX5000 System
Cabling
Initial Configuration
0
Before the DX3000/DX5000 is operational, you must
configure the system by completing the remote
management setup screens.
Power supply cables
Ethernet ports
Fibre Channel ports (optional Optyon™ card)
1 2
Power supply cables
Ethernet ports
Fibre Channel ports (optional
Optyon™ cards)
1 2
Configuring the DX3000/DX5000 consists of the following
major steps:
•
Accept the License Agreement
•
Complete the User Registration
•
Complete the Network Configuration
•
Select a RAID Configuration
•
Create Cartridges on the DX3000/DX5000
To configure the DX3000/DX5000:
1
Turn on the D3000/DX5000 system by pressing the
power button located on the front of the chassis (see
figure 13
).
Figure 13 Power Buttons
2
On a computer on the same subnet as the DX3000/
DX5000, enter the IP address of the system in the
Address field of a web browser.
The
Log In
screen displays (see
figure 14
).
N
OTE
:
The default IP address is:
10.1.1.1
for port 1
and
10.0.1.0
for port 2.
$8
1UANTUM
(
03
34!453
Power button
Power button