DLT-V4-Bandlaufwerk Kurzanleitung
8
Abbildung 7 Verbindung der
Kabel: SCSI-Bandlaufwerk
9 Nur USB/eSATA-Bandlaufwerke:
Schließen Sie das
USB- oder eSATA-Kabel am Bandlaufwerk und am USB-
oder eSATA-Anschluss am Computer an (siehe
Abbildung 8
).
A
NMERKUNG
:
Nur USB-Bandlaufwerke:
Um
bestmögliche Leistung zu erreichen, sollte das
USB-Bandlaufwerk am USB 2.0-Anschluss
angeschlossen werden und das einzige Gerät auf
dem Root-Hub sein.
LVD/SE-Host-Bus-
Adapter
SCSI-Kabel
Aus
Ein
Terminator
SCSI-Kabel
Abbildung 8 Verbindung der
Kabel: USB/eSATA-Bandlaufwerk
10
Stellen Sie sicher, dass der Netzschalter auf der
Rückseite des Bandlaufwerk in der AUS-Stellung ist.
Schließen Sie das Netzkabel am Bandlaufwerk an und
stecken Sie das Netzkabel in die am nächsten gelegene
Steckdose (siehe
Abbildung 7
oder
Abbildung 8
).
11
Schließen Sie die Netzkabel an den Hostserver oder die
Workstation und alle Peripheriegeräte an.
12
Schalten Sie das Bandlaufwerk und alle
Peripheriegeräte ein.
13
Schalten Sie den Server oder die Workstation ein und
lassen Sie das Betriebssystem hochfahren.
Netzkabel
eSATA-
Kabel
USB-
Kabel
Ein
Aus
Installieren Sie nur EINS
(nicht beide)