background image

Proper Storage Conditions

Normal Storage
(Non Archival)

• Between 61° F and 90° F (16° C and 32° C)
• Between 20% and 80% relative humidity
• Maximum wet bulb temperature 78° F (26° C)

• Between 64° F and 79° F (18° C and 26° C)
• Between 40% and 60% relative humidity

Data Archival 
Storage (for one 
or more years)

Media Use

Proper Conditions

Protecting Your Cartridge

Labeling Your Cartridge

Media Care
Overview

3

•  Use the sliding labels provided. 

   Do not use adhesive labels or Post-it

®

 notes.

•  Do not write directly on the cartridge.

•  Write in pen, not pencil. Using a pencil can

  introduce contaminants to the tape path.

•  Protect cartridges from shock, vibration, 

  moisture and magnetic fields.

•  Keep media in protective cases and store 

  vertically when not in use

•  Make sure that no loose labels in the storage

   container stick to the bottom of the cartridge

   when inserting into tape drive.

•  Never touch the tape or tape leader. 

  Dust and oils from your skin can contaminate

   the tape and affect performance.

•  Avoid direct sunlight–can deform

  cartridge and /or ruin media.

   

www.quantum.com

Media Care Overview

DLTtape Media Care Guide

3

Summary of Contents for DLT 8000











Reviews: