![background image](http://html1.mh-extra.com/html/quantum/cd72lwe/cd72lwe_installation-instructions-manual_770491005.webp)
Internal Tape Drive
5
DDS-4/DAT 72
• Avoid contact between the drive, other equipment, and clothing. The wrist strap only
protects the equipment from ESD voltages on the body; ESD voltages on clothing can
still cause damage.
• When the drive is not being used, keep it in its antistatic bag.
• Before you remove the drive from the antistatic bag, touch a metal or grounded
surface to discharge any static electricity buildup from your body.
• Hold the drive by its edges only. Avoid touching any exposed parts on the printed
circuit board.
• Always place the drive on top of or inside the antistatic bag to reduce the chance of
ESD damage.
Installing an Internal Tape
Drive with a SCSI
Connector
0
To install an internal tape drive with a SCSI connector:
1
Unpack the contents of your drive package. If any item is damaged, please contact
your place of purchase immediately.
2
In addition to the contents included with your tape drive, you need the following
items:
• A SCSI host bus adapter (for SCSI drives) that is properly installed and
configured in a host computer
• A 3.5-inch or 5.25-inch half-height bay
• A SCSI ribbon cable
• Backup application software that supports the tape drive. For a list of the latest
backup software applications tested with the internal DDS-4 and DAT 72 tape
drives, please visit our Web site at
www.quantum.com/support.
3
Before proceeding with the installation, gather the tools you will need to install the
internal tape drive into the computer mounting bay. The following list identifies some
of the tools you will need:
• Phillips screwdriver
• Flat blade screwdriver, if your computer uses flathead screws
• TORX screwdriver, if your computer uses TORX screws
• Computer documentation, which you can refer to during the installation
You may need additional items, depending on your installation requirements.
4
Review the drive's default settings and change them if necessary: (For detailed setting
information, please refer to your User's Guide on the CD-ROM.)
• Parity Checking: Enabled
• Terminator Power: Supplied to the SCSI bus
• Data Compression: Enabled
• Media Recognition (DDS-4 drives only): Enabled
• Power-On Self-Test: Enabled
• Vendor ID: SEAGATE DAT
Summary of Contents for CD72LWE
Page 51: ...51 DDS 4 DAT 72 7 5 3 5 5 25 6 7 a SCSI LVD 16 Wide Wide SCSI SCSI LVD SCSI SCSI SCSI b 4 AC...
Page 62: ...62 DDS 4 DAT 72 7 5 3 5 5 25 6 7 a SCSI LVD 16 SCSI SCSI LVD SCSI SCSI SCSI b 4...
Page 73: ...73 DDS 4 DAT 72 7 5 3 5 5 25 6 7 a SCSI SCSI LVD 16 SCSI LVD SCSI SCSI b 4...
Page 84: ...84 DDS 4 DAT 72 7 5 3 5 5 25 6 7 a SCSI LVD 16 SCSI SCSI LVD SCSI SCSI SCSI b 4...