Quantum ATL StackLink, Installation Instructions Manual, Page: 3 / 28

Quantum|ATL StackLink™ Installation Instructions
Document 6421009-03, Ver. 3, Rel. 0
November 2001
Introduction 3
Introduction
0
This document explains how to install the Quantum|ATL
StackLink™. The StackLink provides the physical connection between
M1500 library modules in an M1500 stack, allowing each of the tape
drives in the stack to have access to all of the data cartridges.
Before you start the StackLink installation procedure:
• Verify that the StackLink kit contains all of the necessary items (see
the following section, StackLink Kit Contents ).
• Make sure you have the necessary tools for the installation (see
Required Tools on page 4).
StackLink Kit
Contents
0
Table 1 lists the contents of the StackLink kit. If any items are missing,
contact Quantum|ATL.
Table 1 Contents,
StackLink Kit
Part No. Description
Quantity Provided
w/ 2
-high
S
ta
ckL
in
k
w/ 5
-high
S
ta
ckL
in
k
w/ 1
0
-h
igh
S
ta
ckL
in
k
214370/01 Top mounting tray assembly 1 1 1
214380/01 Bottom mounting tray assembly 1 1 1
214390/01 Vertical shuttle assembly (2 unit) 1 N/A N/A
214400/01 Vertical shuttle assembly (5 unit) N/A 1 N/A
214410/01 Vertical shuttle assembly (10 unit) N/A N/A 1
214450/01 Shuttle motor mount assembly 1 1 1
215180/01 Carriage/counterweight
assembly
1 1 1
212579 Front safety blanking panel N/A 3 8
212502 Rear safety blanking panel N/A 3 8
214090/01 StackLink motor cable (.6 meter) 1 N/A N/A
214080/01 StackLink motor cable (1 meter) N/A 1 N/A
214070/01 StackLink motor cable (2 meter) N/A N/A 1