Quantum ATL M-Series, User Manual

Page: 89 / 222

Chapter 3 Changing the Library Configuration
Changing the Import/Export Setting
ATL M-Series User’s Guide 71
To select the
Import/Export
setting:
1
Access the
Configuration
screen (see Accessing the
Configuration Screen on page 53).
2
Press the
Up
or
Down
buttons until
Import/Export
is
highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Import/Export
setting. The available settings are
None
,
1-Slot
,
10-Slot
(or
12-Slot
in LTO libraries), and
MAP
.
5
Press
Select
.
To return to the
Configuration
screen without changing the
option setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Caution:
Changing this setting may cause the host(s) to fail to
recognize the library. If you change this setting, be
aware that you will have to reconfigure your backup
software for the new library configuration.
Note:
The default setting is
MAP
.
Caution:
If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note:
You must reboot the library before this setting will
take effect.