Quantum ATL M-Series, User Manual

Page: 111 / 222

Chapter 5 Running Diagnostic Programs
Running the Move Location Test
ATL M-Series User’s Guide 93
the selected number of test cycles. The home location depends on
whether the destination is a tape drive or a magazine slot:
• If the destination is a tape drive, the home location is slot 1 of
the level 1 left magazine.
• If the destination is a magazine slot, the home location is the
first installed tape drive.
To run the
Move Location
test:
1
Access the
Diagnostics Menu
screen (see Accessing the
Diagnostics Menu Screen on page 85).
2
Press the
Up
and
Down
buttons to select
General
.
3
Press
Select
.
The GUI displays the
Diags: General
screen (see figure 48 on
page 87).
4
Press the
Up
or
Down
buttons to select
Move Location
.
5
Press
Select
.
The GUI displays the
Diag: Move-Location
screen (see
figure 54 ).
Figure 54 Sample
Diag: Move-Location
Screen