![background image](http://html1.mh-extra.com/html/quantum/a-series-ftp/a-series-ftp_quick-start-manual_3559352006.webp)
6
Installing the Rackmount Tape Drive
A-Series Tape Drives Quick Start Guide
2
Secure the unit to the rack with the thumbscrews.
3
Connect the power cable to the rear of the rackmount A-Series tape drive (see
figure 6
).
Figure 6 Connecting the Power
and Network Cables
4
Connect one end of the Ethernet cable to the network port located on the rear of the A-
Series tape drive and connect the other end to a network switch or router.
5
Power on the tape drive using the switch on the front panel of the rackmount unit.
6
Proceed to
Configuring the A-Series Tape Drive
.
Power cord
connector
(to router or switch)
Network port
To power