3. Using the Quantum RDX Removable Hard Disk
Storage System
3.1 Operating the RDX System
This section describes typical activities involved in operating and maintaining the RDX system.
For instructions on using your backup software, see the manual that came with your software.
3.2 Handling the RDX Cartridges
Although RDX cartridges are rugged, it is always a best practice to take extra care not to drop
them when handling. This will ensure data integrity and long life. Observe the following
precautions:
•
Store cartridges in their protective cases when you are not using them.
•
Do not stack RDX cartridges.
•
Keep cartridges away from dust, dirt, and moisture.
•
Avoid direct sunlight, heat sources, temperature extremes, and rapid changes in temperature.
•
Never try to force the cartridge into the docking station. If it is difficult to insert, check the
orientation and ensure correct alignment, using the keyed corner as a guide.
3.3 Loading and Unloading Cartridges
The front of your docking station has an opening for inserting RDX cartridges. A protective door
covers the opening. Below and to the right of the door is the power indicator that doubles as a
cartridge-Eject button.
To Load a Cartridge
Insert the cartridge in the docking station with the keyed corner facing the upper left corner of the
docking station and the write-protect tab on the back right (see Figure 6). The cartridge only fits in
one orientation. Push the cartridge gently into the docking station until it locks in place with a
clicking sound.
Figure 6: Loading the Cartridge
(1) Keyed Corner
(2) Write Protect Tab
Page
11
