10
SOFTWARE INSTALLATION (CD)
If you have a Quantum CD-ROM, follow these steps to install QSlide™ software and USB
drivers. If you previously installed such drivers, do not install them again.
If you
experience problems, make sure you have administrative rights (e.g. under XP Pro).
Install the QSlide™ Signal Viewing Software
To install the QSlide™ viewing software, simply copy the file
Qslide_V[x].exe
from the supplied
CD to your Windows Desktop. The software can be found on the CD in folder
D:\SOFTWARE\
(
replace
D:
with the actual drive letter of your CD)
Install the USB Drivers
Place the CD-ROM in your CD drive.
Connect the USB adapter box to the
PC using the supplied USB cable. The
E510 may be connected (or not).
Windows will display the
Found New
Hardware Wizard
for the
USB <-> Serial Cable
. Select
Install
the software automatically
and click
Next
. Windows now installs the
drivers. Click
Finish
when prompted.
The
Found New Hardware Wizard
will appear again for the
USB Serial
Port
device. Simply repeat the above
steps again.
Windows may prompt you to restart your PC at this point;
restarting is not necessary
.
You are now done with the software and driver installation. Go back to page 4.
