24
www.quantumrehab.com
Vibe
Figure 14. Seatback and Armrest Adjustments
SEATBACK
ANGLE
ADJUSTING
SCREW
ARMREST KNOB
JAM NUT
JAM NUT
Figure 13. Seat Mounting Holes
SEATBACK ANGLE ADJUSTMENT
If your Vibe is equipped with an adjustable seatback, you
can adjust it to four (4) different angles: 90°, 102°, 105°,
or 107°.
To adjust the seatback angle:
1. Remove the adjusting screws on both seat hinges. See
figure 14.
2. Set the seatback at desired angle.
3. Reinstall the screws on both seat hinges and tighten.
Armrest Width Adjustment
You can change each armrests width independently of each
other.
NOTE: Changing the armrest width may increase
the overall width of your Vibe.
To change the armrest width:
1. Locate the two armrest knobs on each side of the
armrest receiver bracket. See figure 14.
2. Loosen the knobs.
3. Slide the armrests in or out to the desired width.
4. Tighten the knobs.
Armrest Angle Adjustment
To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to
the floor.
2. Loosen the jam nuts. See figure 14.
3. Loosen the adjusting screw.
4. Turn the adjusting screw clockwise to raise the front of
the armrest, or turn the adjusting screw counterclock-
wise to lower the front of the armrest. See figure 14.
5. Tighten the jam nuts to lock the adjusting screw into
place.
Controller Position
You can position the controller for either left-hand or right-
hand use.
WARNING! Do not place the controller
cable so that it can be pinched in the
seat frame or the power base frame.
V I . C O M F O R T A D J U S T M E N T S
SEAT HINGE
ARMREST ANGLE ADJUSTING SCREW
