4.2-Pairing Hand Control to Device
4.2 PAIRING HAND CONTROL TO DEVICE:
With a mode command navigate to the Aux Profi le. Once in this
menu highlight the remote control selection and make a right com-
mand of the joystick to enter selection.
With a forward or reverse command of the joystick navigate to the
bluetooth selection then highlight and make a right command to
enter.
To begin the pairing of the hand control to the Iphone or Ipad you
must make the hand control bluetooth visible. With a forward or
reverse command of the joystick navigate to the BT Visibility and
make a right command to enter.
Once in the BT Visibility selection make a forward command of the
joystick to turn on visibility.
Note: Turning visibility on is only required the fi rst time a device
is paired. Once paired this step is no longer necessary for that
device.
Page 15
