Quantum Rehab Dynamo Page 35 Owner'S Manual Download | Manualshive

Page: 35 / 59

background image

Quantum Dynamo

www.quantumrehab.com

35

Horn Key

The horn key activates the horn.

Locking/Unlocking the VSI

The VSI has a feature that enables you to lock your power chair to prevent unauthorized use.

To lock the VSI:
1. With the VSI switched on, press and hold the on/off key. After one second, the VSI should beep.
2. Release the on/off key.
3. Push the joystick to the full forward position until the VSI beeps.
4. Pull the joystick to the full rearward position until the VSI beeps.
5. Release the joystick. There should be a long beep.
6. The VSI is now locked.

To unlock the VSI:
1. Press the on/off key and power on the VSI. The maximum speed/profile indicator should ripple side to side.
2. Push the joystick to the full forward position until the VSI beeps.
3. Pull the joystick to the full rearward position until the VSI beeps.
4. Release the joystick. There should be a long beep.
5. The VSI is now unlocked.

NOTE: If the above procedure fails to either lock or unlock the VSI, contact your Quantum Rehab Specialist.

Off-board Charger/Programming Socket

You may use an off-board charger to charge the power chair batteries through the 3-pin socket located on the front of the
VSI. See figure 26. If you use an off-board charger, the charger current should not exceed 8 amps. Contact your Quantum
Rehab Specialist for more information.

WARNING! Only chargers with Neutrik NC3MX plugs should be connected to the off-board charger/

programming socket. See your Quantum Rehab Specialist for more information.

NOTE: The socket may also be used for reprogramming the VSI. Contact your Quantum Rehab Specialist for
more information.

NOTE: Changes to the programming can only be made by the manufacturer, an authorized representative of
the manufacturer, or a Quantum Rehab Specialist.

Controller Connector

This connects the VSI to the power chair’s batteries, motors, and motor brakes.

3-pin Charger Inhibit Connector

This connects the VSI to the onboard battery charger. This connection provides an inhibit that disables the VSI when the
battery charger is on. The charger inhibit connector is coded with colored dots. The dots are positioned so that you align
the flat side of the male connector with the flat side of the female connector before making the connection.

V I I . O P E R A T I O N

«
...
33
34
35
36
37
...
»

Summary of Contents for Dynamo




























































Reviews:

No comments

Related manuals for Dynamo

Brand: TA Pages: 19

Brand: B+B Pages: 90

Brand: Pride Mobility Pages: 43

Quantum 1121 3MP

Brand: Pride Mobility Pages: 39

Brand: Pride Pages: 52

Brand: IRIS Pages: 12

Brand: R82 Pages: 12

Zitzi Flipper Pro

Brand: Anatomic SITT Pages: 20

Brand: EZee Life Pages: 5

Brand: EZee Life Pages: 8

Brand: EZee Life Pages: 6

Brand: EZee Life Pages: 20

Brand: EZee Life Pages: 23

Brand: ROHO Pages: 10

AGILITY AG-LATFX-L-FL

Brand: ROHO Pages: 18

Brand: Vermeiren Pages: 120

Atlantis PR46068

Brand: ABLE2 Pages: 2

Brand: rainbow care Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands