manualshive.com logo in svg

Quantum Rehab Dynamo ATS, Owner'S Manual

Share
Download
Quantum Rehab Dynamo ATS Owner'S Manual Download Page 36

36

www.pridemobility.com

Quantum Dynamo ATS RevE/May03

Figure 33. Cup Holder

OPTIONAL ACCESSORIES

Figure 30. Oxygen Tank Holder

Figure 32. Cane/
Crutch Holder
(Seatback Mount)

Figure 31. Walker
Holder

The following accessories are available from your authorized Pride
provider.

POSITIONING BELT

The positioning belt is designed to support the operator’s torso so that
he or she does not slide down or forward in the seat. The positioning
belt is not designed for use as a restraining device. Make sure the belt
is secure but does not cause discomfort.

WARNING! The positioning belt is not designed for use
as a seat belt in a motor vehicle. Nor is your Quantum
Dynamo ATS suitable for use as a seat in any vehicle.
Anyone traveling in a vehicle should be properly belted
into seats approved by the vehicle manufacturer.

OXYGEN TANK HOLDER

The removable oxygen tank holder is mounted to the back of the seat
by means of an accessory bracket. See figure 30.

WALKER HOLDER

The removable walker holder is mounted to the back of the seat by
means of an accessory bracket. It can hold a standard size walker. See
figure 31.

CANE AND CRUTCH HOLDER

The removable cane and crutch holder is mounted to the back of the
seat by means of an accessory bracket. See figure 32.

REAR BASKET

The rear basket is mounted to the accessory bracket. It has a handle
that you can use when you remove the basket from your power chair.

CUP HOLDER

The cup holder mounts to the armrest. See figure 33.

SWING-AWAY JOYSTICK BRACKET

This option enables you to move the joystick from the front of the armrest
to the side of the armrest without disconnecting it.

ELEVATING LEG RESTS

Elevating Leg Rests (ELRs) allow you to raise each leg manually to aid
in circulation. The ELRs are length-adjustable for user comfort.

FOOTREST

The footrest is height and angle adjustable and provides you with a
resting place for your feet while you operate your power chair.

SPECIALTY SEATING SYSTEMS

Your Quantum Dynamo ATS may be equipped with specialty seating.
Please refer to the instructions that come with the seat.

O

PTIONAL

 A

CCESSORIES

Summary of Contents for Dynamo ATS









































Reviews:

No comments

Brands by name

Popular brands

Load more brands