Quantum Rehab 1650 Owner'S Manual Download

Page: 37 / 43

Quantum 1650/RevA/Jan04

www.pridemobility.com

OPTIONAL ACCESSORIES

The following accessories are available from your Quantum Rehab Specialist.

POSITIONING BELT

An auto-type positioning belt is available for your power chair as an optional accessory. The positioning belt is designed to

support the operator so that he/she does not slide down or forward in the seat and can be adjusted for operator comfort.

The positioning belt is not designed for use as a restraining device. See figures 25 and 26.

WARNING! The positioning belt is not designed for use as a seat belt in a motor vehicle. Nor is

your power chair suitable for use as a seat in any vehicle. Anyone traveling in a vehicle should be

properly belted into seats approved by the vehicle manufacturer.

I X . O P T I O N A L A C C E S S O R I E S

To install the positioning belt on a medium and high-back seat:

1. Remove the rearmost screw that holds the seat hinge to the seat base on both the left and right seat hinges.

2. Insert the screw through the supplied washer, through the positioning belt, and into the seat base for each side of the

power chair seat.

3. Tighten both screws.

To install the positioning belt on a Euro seat:

1. Insert the button head socket cap screw through the washer and the mounting tab atthe end of the positioning belt.

2. Install the screw through the spacer and the large black plastic spacer, then insert the screw through the seat base

rail at the rear of the seat.

3. Install the Nylock nut to the assembly, and then tighten the screw and nut using a hex key and an open-end spanner.

4. Repeat steps 1-3 for the other side.

Figure 25. Positioning Belt

Summary of Contents for 1650












































Search results

Summary of Contents for 1650

Reviews:

Related manuals for 1650

Brands by name

Popular brands

Quantum Rehab 1650, Owner'S Manual

Search results

Summary of Contents for 1650

Reviews:

Related manuals for 1650

Brands by name

Popular brands