22
www.pridemobility.com
Quantum 1650/RevA/Jan04
V . C O M F O R T A D J U S T M E N T S
To install the armrest assembly:
1. Place the armrest assembly into the armrest lock. See
figure 10.
2. Rotate the armrest lock lever forward.
Armrest Position Adjustment
The position of the armrests along the side rails can be ad-
justed forward or rearward.
To adjust the armrest position:
1. Remove the armrest from the armrest lock.
2. Loosen the flat head screws that fasten the armrest lock
to the seat base side rail. See figure 11.
3. Slide the armrest lock forward or rearward along the
seat base side rail.
4. Tighten the flat head screws.
5. Install the armrest in the armrest lock. See figure 11.
6. Repeat for the other side if necessary.
Armrest Height Adjustment
The height of the armrest can be adjusted by sliding the
armrest up or down the detent bar using the required tool.
To adjust the armrest height:
1. Rotate the armrest lock lever rearward and remove the
armrest from the armrest lock. See figure 12.
2. Remove the two (2) button head cap screws from the
side of the armrest.
3. Slide the armrest up or down the detent bar to the
desired height.
4. Reinstall the button head cap screws to the side of the
armrest.
5. Install the armrest in the armrest lock and rotate the
lock lever forward.
6. If necessary, repeat for the other armrest.
Controller Position
You can position the controller for either left-hand or right-
hand use.
WARNING! Do not place the controller
cable so that it can be pinched in the
seat frame or the power base frame.
Figure 11. Armrest Position Adjustment
Figure 12. Armrest Height Adjustment
