Manual for Advance 6A/Advance 6B
l
Video Off
Blank Screen The system BIOS will only blank off the screen
Method
when disabling video.
V / H SYNC + In addition to Blank Screen, BIOS will also turn
Blank
off the V-SYNC & H - SYNC signals from VGA
cards to monitor.
DPMS
This function is enabled only for the VGA card
supporting DPMS.
l
MODEM Use IRQ
3,4,5,7,9,
10,11
NA
l
Soft-off by
Instant-off
The system will power off immediately once the
PWRBTN
power button is pressed.
Delay 4 Sec
The system will not power off until the power
button has been pressed continuously for more
than 4 seconds.
l
State after
Off
The system resumes Off when the AC power
Power failure
supply powers on.
O n
The system will be powered up when the AC
power supply powers on.
Auto
Whatever the system status is before the AC
power supply powers down, the system resumes
in the previous status(ON/OFF) when the AC
power supply powers on.
l
Wake Up Events
Press Enter
set the following items.
l
VGA
O n
VGA active reloads global timer.
Off
VGA active has no influence to global timer.
l
LPT&COM
LPT/COM
Set the options of these items to reload global
HDD&FDD
Off/On
timer.
PCI/master
on/off
l
Poweron by PCI
Disable
Disable power-on by PCI card.
card
Enable
Enable power-on by PCI card.
l
Wake up On by
Enabled
Allows the system to be powered on when a ring
Ring/ LAN
indicator signal comes up to UART1 or UART2
from an external modem or comes up to WOM
header from an internal modem card, or when a
remote wake up signal comes up to the WOL
header from LAN adapter.
Disabled
Does not allow wake up on LAN or wake up
from internal/external modem.
l
RTC Alarm
Enabled
RTC alarm can be used to generate a wake event
Resume
to power up the system which is in power-off
status. You can set any date or any time to
power up the system.
Disabled
RTC has no alarm function.
l
IRQs Activity
Press Enter
Reloads global timer.
Monitoring
Chapter 3
