TPA-MHL-8R - Quick Start Guide
68-00224 - Rev. A4
Page 5
August 31, 2011
TPA-MHL-8R Section
Connector Label
Connection
882 CONNECTIONS
SINK DUT
HDMI IN
This is an HDMI input used for HDCP compliance
testing of MHL sink devices. An HDMI cable is
connected to the Encryption Status Tester (EST) used
with the 882EA HDMI output. For basic functional
testing of an MHL sink device, an HDMI source
devices or 780 Handheld Test Instrument is connected
to this port.
MHL OUT
TO DUT
Connect MHL cable to the MHL sink device under test,
e.g. HDTV.
980 Connections
CBUS ANALYSIS
MHL IN
FROM SOURCE
Connect MHL cable from MHL source device under
test, e.g. mobile phone.
MHL OUT
TO SINK
Connect MHL cable to the MHL sink device under test,
e.g. HDTV.
TO 980
TRIGGER IN
CBUS
Connect coax cable to TRIG IN port on 980 Protocol
Analyzer.
