Quantum Data Gen 2 980, User Manual

Page: 20 / 315

980 HDMI Protocol Analyzer User Guide Rev. A1
Page 20 December 19, 2012
2.7 Connection for external 980 GUI Manager
This subsection describes the options for connecting the external 980 GUI Manager to the 980 HDMI Protocol
Analyzer. In order to operate the 980 HDMI Protocol Analyzer with the 980 GUI Manager you will need to establish
a connection between the 980 HDMI Protocol Analyzer and the PC hosting the 980 GUI Manager. The 980 GUI
Manager will be running on your laptop or host PC. You will either be connecting directly from the 980 GUI
Manager to the 980 HDMI Protocol Analyzer through an Ethernet cable or you will be connecting through your
corporate LAN network.
If you are connecting directly between your host PC and the 980 HDMI Protocol Analyzer you will need to ensure
that the IP addresses of the 980 and the network interface card on your host PC are compatible. To be compatible,
the IP addresses must have the same network portions of their IP address but different host portions. You can
either change the IP address of the host PC using standard Windows OS techniques or you can change the IP
address of the 980. The 980 is provisioned with a default IP address (192.168.1.10). The procedures for changing
the IP address of the 980 are provided in the next subsection.
If you are connecting through your corporate LAN, the PC that the external 980 GUI Manager is running on, will
typically have an IP address assigned to it through DHCP services. You can either assign an IP address to the 980
directly or allow the network DHCP server to assign one to the 980 that is compatible with your corporate network.
To be compatible, the IP address of the 980 must have the same network portion of the IP address as your network
but a unique host portion. The 980 is provisioned with a default IP address (192.168.1.10). The procedures for
changing the IP address of the 980 are provided in the following subsection. These procedures also describe how
to enable the 980 DHCP client to allow the network to assign an IP address.
2.7.1 Making the physical Ethernet connections for 980 GUI Manager
This section describes how to connect the 980 HDMI Protocol Analyzer to your PC hosting the 980 GUI Manager.
This procedure assumes that you have assembled the 980 HDMI Protocol Analyzer and source device under test
into your work area. There are three connection scenarios depending on whether you are using the embedded 980
GUI Manager or the external 980 GUI Manager and also depending on whether you are connecting your host PC
to the 980 through your corporate LAN or directly.
Ethernet connections when using the embedded 980 GUI Manager:
There are no Ethernet connections necessary when using
the 980’s embedded GUI manager.
To make the physical Ethernet connection when using the external 980 GUI Manager when connecting
through your corporate LAN or local Ethernet hub:
This procedure is used when you are using the external 980 GUI Manager and connecting to the 980 through your
corporate LAN network. This procedure is required to establish an IP session between the 980 GUI Manager
running on the 980 Protocol Analyzer. This procedure assumes that you have assembled the 980 HDMI Protocol
Analyzer, host PC and source device under test and applied power to all these devices. Refer to the procedures
and diagrams below. The first diagram shows the Ethernet connections through a LAN or hub for testing an HDMI
source.