SPECIFICATIONS
8530 Series
MODELS
8534 - 4 independent channel outputs
Communications: USB, RS232 & Ethernet Ports
8538 - 8 independent channel outputs
Configuration Storage: 12 memory slots
PROGRAMMABLE TIMING GENERATOR
channel modes
single shot, burst, normal, duty cycle.
control modes
internally triggered, externally triggered and external gate
output multiplexer
any/all channels may be multiplexed to any/all outputs
delayed output 0 to 9,999,999 pulses
timebase
same as internal rate generator
DELAYS
range
0 - 1000 s
accuracy
1.5 ns + 0.0001 delay
resolution
250 ps
RMS jitter
< 400 ps
pulse inhibit delay/output inhibit delay
120 ns / 50 ns
INTERNAL RATE GENERATOR
timebase
100 MHz, low jitter PLL
rate
0.0002 Hz to 10.000 MHz
resolution
10 ns
accuracy
same as timebase
RMS jitter
50 ps
burst mode
1 to 9,999,999 pulses
oscillator
50 MHz, 25 ppm
TTL /ADJUSTABLE CHANNEL OUTPUT IMPEDANCE
50 ohm
TTL /CMOS Mode
output Level
4.0 V typ into 1 kohm
rise time
3 ns typical
slew rate
> 0.5 V/ns
jtter
50 ps RMS
ADJUSTABLE MODE
output level
2.0 to 20 VDC into 1 kohm, 1.0 to 10 VDC into 50 ohms
output resolution
10 mV
current
200 mA typical, 400 mA max (short pulses)
slew rate
> 0.1 V/ns
overshoot
< 100 mV + 10% of pulse amplitude
TRIGGER/GATE DUAL INPUT MODULE (standard)
Standard dual channel input, providing one trigger input and one gate input. May be used with the dual trigger firmware option to provide two
independent trigger sources.
threshold
0.2 to 15 VDC
maximum input voltage
60 V peak
resolution
10 mV
input impedance
1 Mohm + 40 pF or 50 ohm
trigger insertion delay
< 180 ns
trigger jitter
< 800 ps RMS
external clock in/out
10 MHz - 100 MHz
OPTIONS
I - Incrementing (provides automatic high speed incrementing/decrementing of delay and/or pulsewidth for each channel)
TZ50 - Quad Channel, High Current TTL/CMOS (for driving 50 ohm loads) & Adjustable Output Module
DT15 -Dual Trigger Logic – provides additional trigger via gate input
PS - Power Supply
RMS jitter
< 400 ps
pulse inhibit delay/output inhibit delay
120 ns / 50 ns
threshold
0.2 to 15 VDC
resolution
10 mV
trigger insertion delay
< 180 ns
Toll Free Phone
(800) 510-6530
Fax Phone Line
(406) 582-0237
Web
www.QuantumComposers.com
V1.5 2/11/2013
