- 6 -
IMPORTANT WARNING!
If the radiator valves in your flat are
equipped with a thermostatic head, adjust it to maximum temper-
ature or replace the thermostatic head of the radiator valve with a
manual control knob in the room where the room thermostat is to
be located, otherwise the thermostatic head may disturb the tem-
perature control of the flat.
2. PUTTING THE THERMOSTAT INTO
OPERATION
The device must be installed and connected by a quali-
fied professional.
Warning!
Modifying the socket can cause electric shock or product
failure.
To put the thermostat into operation, detach the rear panel of the
thermostat from the front panel by
pressing the lock on the upper side of
the housing of the thermostat, as shown
in the figure. The battery compartment is
in the inner side of the front panel of the
housing. Insert 2 AA
alkaline
batteries
(LR6 type) in accordance with the
diagram in the battery compartment.
