- 11 -
3.5 Synchronising the Thermostat and the
Receiver Unit
In order to have a safe, reliable and trouble-free wireless
(radio-frequency) connection, both the thermostat and the
receiver unit have their own safety codes. After installing the
receiver unit, the two units should be
synchronised by pressing the “
LEARN
”
button located above the battery
compartment, on the main panel of the
thermostat. Therefore do not replace
the rear panel of the thermostat onto
the front panel before synchronisation.
The process of synchronisation is
described in
Section 7
.
4. SETTING THE DESIRED TEMPERATURE
After putting the thermostat into operation and adjusting the ba-
sic settings the thermostat is ready for operation and the adjust-
ment of the temperature can be started.
Below the temperature adjustment buttons (
and
) a
switch is located. For both the economy (
w
) and the comfort (
☼
)
