23
QUANTEX GmbH 2014
Actuators tests
Many control units enable to control the actuators (spray jets, engines, solenoid
valves) temporarily to check their operability. These tests are done considering cur-
rent data to observe the system or the actuator responses to action created. The list
of actuators tests depends on the definite ECU model.
To control the actuators, change to the mode of current data viewing. Then se-
lect an actuator name. If there is a scrollbar in the window, then not all the tests are
displayed. Please scroll to see them.
Selecting the button Tests there is a drop-down menu with the list of all the tests
available. To do the test, select the button ..., that is located to the right.
When an actuator is selected, it can be controlled using the buttons or control
devices.
To make it easier, some options current values are displayed sometimes.
Each actuator is tested in its own way. The test type depends on an actuator type:
1. Switch on / Switch off.
2. Open / Close.
